oakwoodgunracks.com

16 Gun Rack – Unfinished

$198 Free Shipping

  • Unfinished racks can hold up to 16 shotguns or rifles while taking up only 24 inches of wall space. 
  •  Top ports are a full 2 3/8" wide to accept even a double barrel shotgun. 
  • Overall dimensions are as follows - overall height from floor to top rest 78 1/2", from floor to upper platform is 45", unit projects 13 1/4" out from wall, and is 24" wide. Lower barrel rest is 36 1/2" from floor and aligns with other units made by us. 

36” Closet Rack & Butt Rest – Walnut Finish

  • Rack is 36" wide and protrudes 13 1/4" from wall, while accommodating 4 barrels per foot, for a total of 12, in 2 1/4" openings.
  • Rack comes with all required wall anchors, screws, and wood plugs to cover screw holes. Peel & Stick felt for barrel rests is included.
  • Finished with walnut stain and lacquer.

$129 free shipping 

36” Closet Rack – Unfinished     $44   ​free shipping

  • Unfinished red oak is sanded smooth and ready to be stained or used as is.
  • Barrel rest can easily be mounted at the height that works best for your guns.
  • Rack is 36" wide and protrudes 3 1/4" from wall, while accommodating 4 barrels per foot in 2 1/4" openings.
  • Comes with all required wall anchors, screws, and wood plugs. Peel & Stick felt for barrel rests is included.


Unfinished Red Oak Gun Rack for Closet Floor with Butt Rest

  • Unfinished red oak is sanded smooth 
  • Barrel rest easily mounts at desired height
  • 2 piece set comes with a butt rest for your floor so that your rifles will not be sliding or resting at awkward angles. 
  • This rack is 36" wide and protrudes 13 1/4" from wall, while accommodating total of 12 barrels, in 2 1/4" openings.
  • Rack comes with all required hardware. Peel & Stick felt for barrel rests is included.

$89 free shipping

​24 Gun - Walnut Finish   $359   Free Shipping!

  • Holds up to 24 shotguns or rifles while taking up only 36 inches of wall space. 
  • Top ports are a full 2 3/8" wide to accept even a double barrel shotgun. Each rack is assembled prior to shipping & labeled for easy re-assembly and installation. The only tools needed are a hammer and screw driver.
  • Rack also comes with blocking that may be needed to allow for installation where there is base board existing. All necessary screws and wall anchors are included, as well as pre-finished wood plugs to cover all screw holes.
  • Overall dimensions are as follows - overall height from floor to top rest 78 1/2", from floor to upper platform is 45", unit projects 13 1/4" out from wall, and is 36" wide. Lower barrel rest is 36 1/2" from floor and aligns with other units made by us. 

16 Gun Rack –Walnut Finish $239 ships free

  • Holds up to 16 shotguns or rifles while taking up only 24 inches of wall space.
  • Top ports are a full 2 3/8" wide to accept even a double barrel shotgun. 
  • Overall dimensions are as follows - overall height from floor to top rest 78 1/2", from floor to upper platform is 45", unit projects 13 1/4" out from wall, and is 24" wide. Lower barrel rest is 36 1/2" from floor and aligns with other units made by us.

8 Gun Rack – Natural Finish  $129  ​Free Shipping!

  • Holds 8 shotguns or rifles, while taking only 24" of wall space.
  • Top ports to support barrels are a full 2 1/4" to accommodate every type up to and including double barrels.
  • Rack is finished with a natural (clear) stain and given 4 coats of lacquer, before being assembled, labeled for re-assembly, and dis-assembled for shipping.
  • When you receive your rack you will need only a screw driver and hammer to assemble and mount to the wall.
  • Blocking is provided to space unit out past any baseboard, up to 3/4". All necessary screws, wall anchors, and wood plugs to cover screw holes are provided, as well as peel and stick felt for barrel rests. All racks are individually constructed at our shop, using pieces with similar grain and colors. 

16 Gun Rack – Natural Finish   $239 free shipping

  • Holds up to 16 shotguns or rifles while taking up only 24 inches of wall space.
  • Top ports are a full 2 3/8" wide to accept even a double barrel shotgun. 
  • Overall dimensions are as follows - overall height from floor to top rest 78 1/2", from floor to upper platform is 45", unit projects 13 1/4" out from wall, and is 24" wide. Lower barrel rest is 36 1/2" from floor and aligns with other units made by us.  We will happily combine shipping on this item when you order 2 or more - just contact us for a quote!

Standing Gun Racks

8 Gun Rack – Walnut Finish  $129 ​free shipping

  • Holds 8 shotguns or rifles, while taking only 24" of wall space. 
  • Top ports to support barrels are a full 2 1/4" to accommodate every type up to and including double barrels.
  • Rack is finished with a walnut stain and 4 coats of lacquer, before being assembled, labeled for re-assembly, and dis-assembled for shipping. You will need only a screwdriver and hammer to assemble and mount to the wall. 
  • Blocking is provided to space unit out past any baseboard, up to 3/4". All necessary screws, wall anchors, and wood plugs to cover screw holes are provided, as well as peel and stick felt for barrel rests. 

12 Gun Rack – Unfinished  $139 ships free!

  •  Each rack is manufactured and assembled in our shop using hand selected material. Prior to shipping each is dis-assembled and labeled for easy re-assembly using only a screw driver.
  • Comes with peel and stick felt at barrel rests. This unit is also a big hit for displaying and organizing fishing rods.
  • Overall dimensions: 36” high, 24” wide outside, and 24” front to back. Bore for barrel rest is 1 5/8” and is 32” above barrel rest.

​12 Gun Rack – Natural Finish  $169  ships free!

  • Each rack is manufactured and assembled in our shop using hand selected material. Prior to shipping each is dis-assembled and labeled for easy re-assembly using only a screw driver.
  • Comes with peel and stick felt at barrel rests. This unit is also a big hit for displaying and organizing fishing rods. 
  • Overall dimensions: 36” high, 24” wide outside, and 24” front to back. Bore for barrel rest is 1 5/8” and is 32” above barrel rest.
  • Furniture quality rack is finished with a natural (clear) stain with a clear lacquer finish.

Butt Rest Addition to Closet Rack

Optional oak butt rest for our single piece "Closet Wall Rack" sits on the floor and with it's 8 degree angle helps stabilize by having the butts seat evenly instead of pivoting on a single point. 

​$54  ​Free Shipping!

8 Gun Rack – Unfinished      $109  free shipping

  • Holds 8 shotguns or rifles, while taking only 24" of wall space. 
  • Top ports to support barrels are a full 2 1/4" to accommodate every type up to and including double barrels. 
  • Rack is left unfinished and looks great as is or can be stained or painted to suit your tastes. It has been assembled, labeled for re-assembly, and dis-assembled for shipping.
  • When you receive your rack you will need only a screw driver and hammer to assemble and mount to the wall. 
  • Blocking is provided to space unit out past any baseboard, up to 3/4". All necessary screws, wall anchors, and wood plugs to cover screw holes are provided, as well as peel and stick felt for barrel rests. All racks are individually constructed at our shop, using pieces with similar grain and colors.